✓ USDA, Iowa State, Texas A&M and Beef Checkoff times · Temperature, not just time · Free, no signup

Prime Rib Cooking Time Calculator

Enter your roast's weight, the cut and how done you want it. You get the roast time from each source at its own oven temperature (300, 325 or 350°F), the temperature to take the roast out of the oven, the rest, the clock time to put it in the oven, and the roast size for your guests.

Your roast

Each source keeps its own numbers. The calculator does not average them. When a source has no row for your weight, it says so and shows no time for that source.

Prime rib roasting times by source

Four sources back the calculator, and each method keeps its own numbers. Iowa State says that timed cooking per pound is flawed, so use a thermometer. The times below are the rows as each source gives them. Iowa State and Texas A&M give a rate per pound with no weight range. USDA and the Beef Checkoff chart give rows for set weights only.

SourceCut and sizeOvenTimeTake out at, rest
Iowa State Extension, traditional methodRib roast, no weight range givenSear at 450°F for 15 to 20 min, then 325°Fabout 13 to 15 min/lb5 to 7°F below your doneness, rest 20 to 30 min
USDA FSISRib roast, bone in, 4 to 6 lb325°F23 to 25 min/lb145°F minimum, rest at least 3 min
USDA FSISRib roast, boneless rolled, 4 to 6 lb325°Fadd 5 to 8 min/lb to the bone-in time145°F minimum, rest at least 3 min
Texas A&M AgriLifePrime rib, no weight range given300°F, fat side up20 to 25 min/lb145°F (medium), rest 15 to 20 min
Beef Checkoff chartRibeye roast, bone-in, 2 ribs, 4 to 6 lb350°Fmedium rare 1 hr 45 min to 2 hr 15 min, medium 2 hr 15 min to 2 hr 45 min135°F (medium rare), 145°F (medium), rest 15 to 20 min
Beef Checkoff chartRibeye roast, bone-in, 4 to 5 ribs, 8 to 10 lb350°Fmedium rare 2 hr 30 min to 3 hr, medium 3 hr to 3 hr 30 min135°F (medium rare), 145°F (medium), rest 15 to 20 min
Beef Checkoff chartRibeye roast, boneless, 3 to 4 lb350°Fmedium rare 1 hr 30 min to 1 hr 45 min, medium 1 hr 45 min to 2 hr135°F (medium rare), 145°F (medium), rest 15 to 20 min

The Iowa State window in the calculator is the 15 to 20 minute sear plus 13 to 15 minutes per pound at 325°F. The USDA times assume beef at refrigerator temperature, 40°F. Iowa State says most recipes let the roast come to room temperature for 1 to 2 hours so it cooks more evenly.

Sources read on 2026-11-16: Iowa State University Extension AnswerLine, USDA FSIS Beef from Farm to Table (Utah State University copy, PDF), Texas A&M AgriLife Extension, Path to the Plate, Beef Checkoff roasting chart (PDF).

Where the sources disagree

Use one source for one roast and check the center with a thermometer.

Doneness temperatures

The Iowa State Extension chart gives these final doneness temperatures for beef rib roast. Take the roast out 5 to 7°F early. As it rests, heat from the outer layers moves to the center and the temperature keeps rising.

USDA food safety. USDA says to cook beef roasts to a minimum internal temperature of 145°F, measured with a food thermometer before you remove the meat from the heat, and to rest the meat for at least 3 minutes. Rare, medium rare and medium are below this USDA minimum. For medium well, the Iowa State pull temperature of 138 to 140°F is also below 145°F at the moment you take the roast out. Iowa State says that preferred doneness is an individual choice, but USDA sets 145°F for safety.

Roast size and thawing

The Beef Checkoff chart says to buy a bone-in roast with 1 rib for every 2 people, for about 3 ounces of cooked beef per person. Its bone-in rows are 2 ribs and 4 to 6 pounds for 4 to 6 servings, and 4 to 5 ribs and 8 to 10 pounds for 8 to 10 servings. For 4 people or fewer, the chart says a steak is the better buy. Texas A&M says a full prime rib is seven ribs, weighs 15 to 18 pounds and can feed 16 or more people. Buy a larger roast if you want leftovers.

For a frozen roast, USDA says bone-in parts and whole roasts may take 2 days or longer to thaw in the refrigerator. In cold water, in an airtight package with the water changed every 30 minutes, a 3- to 4-pound roast may take 2 to 3 hours. USDA says never to defrost beef on the counter. USDA also says it is safe to cook frozen beef in the oven without thawing it, and the cooking time may be about 50% longer. The times in this calculator are for a thawed roast.

Sources for every number

All times, temperatures and amounts on this page come from these four sources. We read them on 2026-11-16.

The calculator shows only the times that a source gives. It does not calculate times between rows or outside a row. The times are estimates. The food thermometer reading is the only doneness test.

Frequently Asked Questions

The Iowa State Extension traditional method gives about 13 to 15 minutes per pound at 325°F after a 450°F sear of 15 to 20 minutes. The USDA table gives a longer time for a 4 to 6 pound bone-in rib roast, 23 to 25 minutes per pound, and 5 to 8 minutes per pound more for a boneless rolled roast. For a 5 pound bone-in roast that is about 1 hour 20 minutes to 1 hour 35 minutes with Iowa State, sear included, and 1 hour 55 minutes to 2 hours 5 minutes with USDA. Always go by temperature, not time.
Iowa State says to pull it 5 to 7°F below your doneness temperature, because the roast keeps cooking while it rests. For medium rare (130-134°F final) that means pulling at about 123 to 125°F. The sources disagree here. The Beef Checkoff chart removes a medium rare roast at 135°F and says it reaches a final 145°F after a 15 to 20 minute rest. Texas A&M cooks to 145°F for medium. USDA says to reach at least 145°F before you remove the roast from the heat. Use one source for one roast and check with a thermometer.
USDA sets the safe minimum for beef roasts at 145°F internal temperature, measured with a food thermometer before you remove the meat from the heat, followed by a rest of at least 3 minutes before carving. Rare, medium rare and medium are below this USDA minimum, and so is the Iowa State pull temperature for medium well. Iowa State says that preferred doneness is an individual choice, but USDA sets 145°F for safety.
The Beef Checkoff chart counts 1 rib for every 2 people, so 10 guests need a 5-rib roast. Its 4 to 5 rib row weighs 8 to 10 pounds. Texas A&M says a full seven-rib roast of 15 to 18 pounds feeds 16 or more, and a 5 pound roast can serve up to 6 to 8. Plan a little more if you want leftovers.
USDA says whole roasts may take 2 days or longer to thaw in the refrigerator. In cold water, with the water changed every 30 minutes, a 3- to 4-pound roast may take 2 to 3 hours. Never thaw beef on the counter.
In the USDA table, yes. It adds 5 to 8 minutes per pound to the bone-in time for a 4 to 6 pound boneless rolled rib roast at 325°F, and the calculator adds this to the USDA time when you choose boneless. The Beef Checkoff chart has a different boneless row, 3 to 4 pounds at 350°F, with 1 hour 30 minutes to 1 hour 45 minutes for medium rare.
The Iowa State Extension says about 20 to 30 minutes, tented, before slicing so the juices reabsorb. The Beef Checkoff chart reaches its final temperature after 15 to 20 minutes of rest, and Texas A&M AgriLife says to let it stand 15 to 20 minutes before carving. USDA says at least 3 minutes for safety.

Related cooking tools

More free calculators from RecipeTool. No signup.